cecotec BOLERO DRESSCODE TOP 80 INVERTER Manual De Instrucciones página 12

- The plug must be accessible after the installation.
- Before using the wash machine, the product shall be
calibrated.
- Do not place excessively heavy objects on the device, as
water containers or heating appliances.
- You must use the new hose set provided with the device, do
not reuse old hoses.
- The maximum inlet water pressure is 1 MPa. The minimum
inlet water pressure is 0.1 MPa.
Electrical connections
- Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
- Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the official Technical
Support Service of Cecotec in order to avoid any type of
danger.
- Do not operate the product if its cord, plug or structure show
visible damage or do not operate properly.
- In case of anomalies (abnormal noises, burning smell,
smoke, etc.), immediately disconnect the power plug to stop
the machine and contact the Cecotec Customer Service.
- Make sure the power cord is not trapped under the machine,
as it could be damaged.
- The installation of an earthed socket must be carried out by
a qualified electrician.
- Make sure the machine is installed according to local
regulations.
- We recommend water and electrical devices are connected
by qualified personnel in accordance with the manufacturer
instructions and local safety regulations.