For Blowing - Makita XCV11 Manual De Instrucciones

The prefilter and dumper reduce dust clogging in the
HEPA filter to keep the suction power.
For picking up wet dust and water
1
Fig.8
► 1. HEPA filter 2. Wet filter
NOTICE:
If you continue to pick up water
with the HEPA filter, the suction power may be
reduced. In that case dry the HEPA filter.
Use the wet filter (optional accessory) when pick-
ing up water repeatedly.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION:
Always wear dust mask during
assembly or maintenance.
Connecting the hose
NOTICE:
Never force the hose for bending or
stamp it. Never move the cleaner by a hose.
Forcing, stamping and pulling the hose may cause a
breakage or deformation of the hose.
NOTICE:
Do not pick up large wastes such as
planer carvings and concrete pieces. It may cause
a hose stuffing and damage.
For vacuum cleaning
Insert the hose into the suction inlet and turn it clock-
wise until it clicks.
2
Fig.9
► 1. Suction inlet

For blowing

Insert the hose to blower outlet and turn it clockwise
until it clicks.
Fig.10
► 1. Blower outlet
NOTE: This cleaner has the suction inlet and blower
outlet separately. Connect the hose to the proper port
depending on your work.
9 ENGLISH
1
1