Symbols; Safety Warnings; Further Safety Instructions - Festool ETS EC 150/3 EQ Manual De Instrucciones

English
Contents
1 Symbols..................................................... 14
2 Safety warnings.........................................14
3 Intended use..............................................15
4 Technical data........................................... 16
5 Parts of the device.....................................16
6 Operation................................................... 16
7 Settings......................................................16
8 Working with the machine........................ 17
9 Service and maintenance..........................18
10 Accessories............................................... 18
11 Environment.............................................. 18
12 General information.................................. 18
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Connecting the mains power cable
Disconnecting the mains power cable
Do not dispose of it with domestic
waste.
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Tool contains a chip which stores data.
See section 12.1
Tip or advice
14
Handling instruction
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2

Further safety instructions

-
Wear suitable personal protective equip­
ment: Ear protection, safety goggles, a dust
mask for work that generates dust.
- Wear suitable breathing protection to pro­
tect your health. In enclosed spaces, en­
sure that there is sufficient ventilation and
connect a mobile dust extractor.
Harmful/poisonous dust may be produced
-
when working (e.g. paint products con­
taining lead and some types of wood).
Contact with or inhalation of this dust may
pose a risk for the operating personnel or
persons in the vicinity. Comply with the
safety regulations that apply in your coun­
try. Connect the power tool to a suitable
dust extractor.
- Use a residual-current circuit break­
er (RCCB) or an isolating transformer if
operation of the power tool in a damp en­
vironment cannot be avoided. In the event
of an electric shock, the residual-current
circuit breaker (RCCB) or isolating trans­
former protects you against life-threaten­
ing current through the body.
- Attention: Risk of fire! Avoid overheating
the grinding material and the sander. Al­
ways empty the dust container before tak­
ing a break. Swarf in the dust bag, microfil­
ter, paper bag (or in the filter bag or filter
of the mobile dust extractor) may sponta­
neously combust in unfavourable condi­
tions such as flying sparks when sanding
metals. Particular danger exists if the
swarf is mixed with paint, polyurethane
residue or other chemical materials and