Technical Data; Symbols; Intended Use; Electrical Connection And Operation - Festool ROTEX RO 150 FEQ Manual De Instrucciones

reproductive harm. Some examples of these chemi-
cals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products,
• Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
To reduce your exposure to these chemi-
cals work in a well ventilated area and
use approved safety equipment, such as
dust masks that are specially designed
to fi lter out microscopic particles. Wash
hands after handling.
O REDUCE THE RISK OF INJURY,
T
USER MUST READ INSTRUCTION MANUAL.

Technical data

Wattage
No load speed
Sanding stroke
Sanding base dia.
Weight
Safety level
720 W
3300 - 6800 rpm
5 mm (0.2 in.)
150 mm (5.9 in.)
2.3 kg (5.1 lbs.)
/ II
5

Symbols

Warning of general danger
Read the Operating Instructions/Notes!
Wear protective goggles
Wear ear protection
Wear a dust mask
V Volts
A Amperes
Hz Hertz
W Watt
~ Alternating current
n No load speed
0
Class II Construction
rpm Revolutions per minute
Ø Diameter

Intended use

The sanders are designed for sanding and polishing
wood, plastic, metal, composite materials, paint/
varnish, fi ller and similar materials.
Do not use with materials containing asbestos.
The tools must not be used when wet or damp,
or operated in a damp environment, for electrical
safety reasons. Use this sander only for dry sanding.
The user bears sole responsibility
for any damage or accidents resulting from incor-
rect use.

Electrical connection and operation

The mains voltage must correspond to the voltage
on the rating plate!
See the adjacent figure for connection and dis-
connection of the power cord.
Always switch the tool off before
connecting or disconnecting the power cord!
To start the tool, push the switch (2.1) forwards.
Slight pressure on the rear end of the switch is
suffi cient to switch the tool off.