KALLISTA P24490-CR Instrucciones De Instalación página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALLATION INSTRUCTIONS
‰ Pull up to remove the handle and bearing from the escutcheon.
NOTE: Use a pick or a similar tool to help remove the spline adapter.
‰ To adjust the handle, remove the screw and reposition the spline adapter.
‰ Reinstall the screw. Ensure that the valve is fully turned to the OFF position.
NOTE: To test the handle alignment, the handle does not need to be fully installed.
‰ Insert the handle until it engages with the spline adapter to verify alignment.
‰ Repeat this procedure until the desired handle alignment is obtained then push the handle down until it
snaps firmly in place against the escutcheon.
‰ To adjust the escutcheon, loosen the screws in the ring to allow for escutcheon adjustment.
‰ Tighten the screws when desired escutcheon alignment is obtained.
1491057-2-A
7 of 20
7. ADJUST THE HANDLE AND ESCUTCHEON ALIGNMENT
Lavatory Faucet
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Tabla de contenido
loading

Tabla de contenido