Données Techniques - Skil 3075 Manual Original

APPLICATION ADVICE
• Use the appropriate bits y
! only use sharp bits
• When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
• When turning in a screw at/near the cross cut end or an
edge of wood, pre-drill a hole in order to avoid cracking
of the wood
For an optimal use of the tool a steady pressure on the
•
screw is required, especially while removing
• When screwdriving in hard wood one should pre-drill a
hole
• Splinterfree drilling in wood u
• Dustfree drilling in walls i
• Dustfree drilling in ceilings o
• Drilling in tiles without skidding p
• For more information see www.skil.com
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool clean (especially ventilation slots H 2)
! remove battery from tool before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
• Be aware that damage due to overload or improper
handling of the tool will be excluded from the warranty
(for the SKIL warranty conditions see www.skil.com or
ask your dealer)
ENVIRONMENT
• Do not dispose of electric tools, batteries,
accessories and packaging together with household
waste material (only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 6 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
NOISE / VIBRATION
• Measured in accordance with EN 62841 the sound
pressure level of this tool is 88 dB(A) and the sound
power level 99 dB(A) (uncertainty K = 5 dB), and the
vibration Þ (triax vector sum; uncertainty K = 1.5 m/s²)
when drilling in metal <2.5 m/s²
✱
when impact drilling in concrete 8.038 m/s²
✱
• The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
b
Perceuse à percussion
compacte sans balais
INTRODUCTION
• Cet outil est destiné au serrage et au desserrage des vis,
au perçage dans le bois, la céramique et le plastique et
au perçage à percussion dans la brique.
• Cet outil n'est pas conçu pour un usage professionnel.
• Lisez et conservez ce mode d'emploi.3
DONNÉES TECHNIQUES 1
Couple max. pour vissage dans des matériaux durs selon
ISO 5393 : 60 Nm
PIÈCES DE L'OUTIL 2
A Interrupteur de marche/arrêt et réglage de vitesse
B Anneau pour réglage du couple
C Position de perçage à percussion
D Position de perçage
E Position de vissage
F Interrupteur pour changer de fonction
G Commutateur de vitesse
H Fentes de ventilation
9. ___
J Commutateur pour inverser le sens de rotation
K Bouton lampe de travail
L LAMPE DE TRAVAIL
M Bouton de l'indicateur de niveau de batterie
N Clip de ceinture
15. P Support pour embout intégré ___
Q Fixation pour dragonne
SÉCURITÉ
CONSIGNES DE SÉCURITÉ GÉNÉRALES POUR L'OUTIL
ÉLECTRIQUE
AVERTISSEMENT Lisez toutes les consignes
-
de sécurité, les instructions, les illustrations et les
spécifications de sécurité fournies avec cet outil
électrique. Le non-respect des consignes figurant ci-
dessous peut provoquer un choc électrique, un incendie et/
ou des blessures graves.
Conservez tous les avertissements et instructions pour
pouvoir vous y référer ultérieurement.
Le terme « outil électrique » utilisé dans les consignes de
11
3075