Gun Operation; Speed Selection; Lcd Functions; Flashlight - Alemite 596 Serie Instrucciones De Usuario

Gun operation

Battery (39) is intentionally shipped with a
low charge Charge battery prior to use
• Refer to the battery charger operation
section for details

Speed selection

Two speed electronic transmission provides
a high and low flow rate Refer to perfor-
mance specifications for delivery rate Gun is
in high speed when 2 is shown on the slide
switch (50) († Fig. 1, page 11) Maximum
pressure can be achieved in both high (2)
and low speed (1)

LCD functions

Liquid Crystal Display (LCD) (46) features an
electronic grease meter, grease level gauge,
and battery level indicator To turn the LCD
ON, tap the reset button (49) one time
(† Fig. 1, page 11)
To enter reset mode, press and hold the
reset button After 2 seconds the digits of the
grease meter begin to flash, unit of measure
(oz/g)
Releasing the reset button when grease
meter digits are flashing will reset the meter
to zero, releasing the button while the
grease cylinder level segments are flashing
will restore the gauge to full, and releasing
the button while the unit of measure is flash-
ing will change unit of measure
Stall
During stall condition (in the case of a
clogged fitting or line) the gun will stop
pumping grease and the LCD display will be
illuminated with red backlight If this condi-
tion occurs, release trigger immediately
Inspect, clean, and/or fix the grease passage
before trying to dispense grease into the
system
Loss of prime
Loss of prime occurs when there is an air
pocket in the grease or when the grease cyl-
inder is empty When this occurs the LCD
screen will flash red to indicate that the gun
is not pumping grease During loss of prime
the grease meter does not count empty pis-
ton strokes
11

Flashlight

To turn the flashlight ON, tap the reset but-
ton one time If the LCD screen is not already
ON, tap reset button twice
To turn the flashlight OFF, simply tap the
reset button one time The flashlight will
automatically turn OFF after 20 seconds
unless the trigger is operated to dispense
grease If trigger is pressed to operate the
gun, the light will remain ON until 20 sec-
onds after the trigger is released
46
49
Fig. 1
50