Technical Specifications; Correct Usage - Rupes HSE73 Traducción Del Manual De Instrucciones Original

WARNING: To reduce the risk of injury, user must read instruction manual
CE marking for EU market
Wear ear protection
Wear gloves
Disposal of decommissioned (WEEE Directive)
Product contains lithium-ion battery
Li-Ion
TYPE
Voltage D.C. [V]
R.P.M.
Electronic speed control
Battery life [min]
Ø Orbit [mm]
Pad shape
Sanding pad dimensions [mm]
Self generated dust extraction
Weight [Kg]
* The value is referred to a use of the battery pack 9HB180LT, fully charged with the charger 9HC180LT.
** measured without the functional units: battery pack or power supply.
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure
to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The safety and accident prevention instructions are reported in the "SAFETY INSTRUCTION" booklet which is an
integral part of these documents. This operating instructions manual indicates the additional information required for the specific
use of the tool.

CORRECT USAGE

• This tool is designed to be used as a sander. Types HSE73 and HSS73 are orbital sanders, type HSR73 is a random orbit sander.
• This tool is not intended to be used for metal brushing, polishing and cutting operations. The use of this tool for unintended
applications may cause hazards and injuries to people.
• The tool must be used with accessories that have been specifically designed or recommended by the manufacturer. The
fixing of the accessory to the tool does not guarantee a safe operation.
• The rated speed of the accessories must be at least equivalent to the maximum speed specified on the tool. Using the
accessories at speeds above the rated one, may cause them to break or be thrown into the air.
• The external diameter and thickness of the accessories must match the specifications of the tool. Accessories with incorrect
dimensions cannot be adequately protected or controlled.
• The configuration of accessories must match the tool. The use of accessories that cannot be perfectly fitted on the tool may
result in imbalance, excessive vibrations and in the impossibility of controlling the tool.
• Do not use damaged accessories. Before use, inspect all the accessories. Inspect the supporting pads and verify there
are no cracks, tears or excessive wear. If the tool or accessory has fallen, verify that it is not damaged or install a new
accessory. After inspecting or installing an accessory, test the operation of the tool at maximum speed and without load for
one minute, keeping at a safety distance. If the accessories are damaged, they will break during this test.
Summary of device labels containing safety information

TECHNICAL SPECIFICATIONS

HSE73
18
7000 ÷ 11000
•
~45*
2
Rectangular
80x130
•
1,0**
Wear eye protection
Wear a mask
Direct Current
HSR73
18
7000 ÷ 11000
•
~45*
2
Circular
Ø125
•
1,0**
ENGLISH
HSS73
18
7000 ÷ 11000
•
~45*
2
Delta
-
•
1,0**
7