Infiniton WM-D89 Manual De Usuario página 64

OPERATION
Spin Speed
Spin
When needed, the spinning speed can be adjusted pressing the Speed button
in the following steps: 0-400-600-800-1000-1200-1400
Delay
1- Select a programme
2- Press the Delay button to choose the delaying
time 0-24h 3.Press [Start/Pause] to start the delay
operation
Choose programme
Cancel the Delay function:
Press the [Delay] button before starting the programme. If the programme already
started, should switch off programme to reset a new one.
Pre Wash
Extra washing function before the main washing cycle starts to increase the washing
performance.
Note: Detergent needs to be added to the compartment I.
Extra Rinse
The laundry will undergo an extra rinse after selecting this function.
Drum Clean
Drum Clean
After the machine runs to the set counting period(counting cycle is 25 times),
Drum Clean lamp flashes at the end of the last program, reminding the user to run
the program;
Release condition:
Press and hold the Drum Clean button for 3s, Drum Clean reminder 3.
will be canceled and washing cycles will be recounted for another 25
cycles.
The counted cycles will be recounted when drum clean program is finished.
4.
Temp.
When needed, the washing temperature can be adjusted by pressing the temperature
button in the following steps: Cold - 20°C - 40°C - 60°C - 90°C.
Setting time
27
Start