Installation; Electrical Connection - Infiniton WM-D89 Manual De Usuario

SAFETY INSTRUCTIONS
•
Do not operate the machine in rooms with a temperature of
below 5°C. This can cause damages to parts of it. If it is
unavoidable, make sure to drain the water completely from the
appliance after every use (see „Maintenance - Cleaning of
drain pump filter") to avoid damages caused by frost.
•
Never use flammable sprays or substances in the
immediate proximity of the appliance.

INSTALLATION

•
Remove all packaging material and transport bolts before
using the appliance. Otherwise, serious damage may result.
•
This appliance is equipped with a single inlet valve and
can be connected to the cold water supply only.
•
Mains plug must be accessible after installation.
•
Before washing clothes for the first time, the product shall
be operated once throughout all the procedures without any
clothes inside.
•
Before using the washer, the product shall be calibrated.
•
Do not put any excessively heavy objects on the appliance,
like water containers or heating devices.
•
The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
•
Max. Inlet water pressure 1 MPa. Min. inlet water pressure
0.05 MPa.

ELECTRICAL CONNECTION

•
Make sure the supply cable is not trapped by the machine, it
can get damaged.
•
Connect the product to a grounded outlet protected by a fuse
complying with the values in the " Technical specifications"
table. The grounding installation has to be made by a qualified
electrician. Ensure that the machine is installed in accordance
with the local regulations.
4