CORBERO LLAMA AZUL Manual De Instrucciones página 6

Fuel
Select the type of fuel
Data
Thermal power
Nominal thermal
power
Minimum heat
output (indicative)
Two or more manual steps without control of room temperature
Power required for the pilot flame
Contacts Kurbin Lane S.L. Paseo del Ferrocarril, 335 08860 Castelldefels ( Barcelona ) SPAIN
(1) NO = nitrogen oxides
x
(2) NA = Not Applicable (no reference standard applicable to the product, which provides for measurement of this
parameter)
INSTRUCTIONS
Mounting of the bottom (where present)
- Remove the plastic button (E).
- Insert the two strips (F) of the base into the rear
holes (D) of the base.
- Plug in the plastic button into the hole (E) to lock
WARNINGS
✓ The stove must always be used according to the instructions. Please read them carefully and keep them in a safe
place.
✓ This appliance requires a rubber tube and a pressure regulator complying with current regulations; if they are not
supplied as standard, contact your local gas supplier or your authorized dealer.
✓ Use the appliance only in sufficiently ventilated rooms.
G30
Symbol Value Unit
P 4.2 kW
nom
P 2.4 kW
min
Type of thermal power / control of the ambient temperature
[gaseous / liquid] [to specify]
gaseous
Data
Useful efficiency (NCV)
Useful efficiency at nominal heat
output
Useful efficiency at minimum
heat output (indicative)
Back cover mounting (where present)
A- Turn the gas bottle so that the opening
remains external for easier entry of the
tap.
B - Be sure that the gas bottle is positioned
internally to the wheel-nuts
C – Position the back cover by putting the
4 hooks into the holes on the body
Emissions due
to environment heating
NOx
(1)
[ mg / kWh ( GCV )
]
input
NA
(2)
Symbol Value
η NA
th, nom (2)
η NA
th, min (2)
YES
0.160
P
pilot
C – For the models with metallic
back cover, unscrews the screws
that secure it, insert the gas
bottle and then screw the screws
in the appropriate holes.
Unit
%
%
kW