Acqua Brevetti BravoFIL FT020 Instrucciones De Instalacion Y Uso página 27

B1.5 Allowed installation schemes
The assembly should be performed respecting one of the schemes indicated here below:
Installation 1.
Left entrance
Right exit
Any other arrangement may cause the no proper operation of the device.
BravoFIL can be installed horizontally and vertically but with the filter drain always facing
downwards.
Warning! It is necessary to install the filter following the water flow direction indicated by
the row stamped on the brass head of the filter.
Follow
direction indicated by the
row stamped on the brass
head of the filter.
BravoFIL owns a 360° brass connection plate that can turn at intervals of 90°. In order to change
the orientation of the brass connection plate it is enough to untight the allen nuts (using a 6 mm
allen wrench). Orientate the plate connection in the desired direction, taking care to position the
white shaped gasket sited between the brass plate and the acetal resin white head in a correct
manner.
The filter drain connection must be conveyed into a visible drain in a stable manner.
In case of doubt contact with Acqua Brevetti SRL (Tel.: +39.049.8973432 or send an e-mail to
[email protected]
BravoFIL - ENGLISH
Installation 2.
Bottom entrance
Top exit
the water flow 6 mm allen nuts to tight the
brass connection plate.
Installation 3.
Right entrance
Left exit
Installation 4.
Top entrance
Bottom exit