Bulb Replacement; Led Lights - Jocel JCEI60-007551 Manual De Instrucciones

.
In order to install the activated carbon filter, the aluminium filter should be detached first. Firstly open
carefully the stainless steel cover, then press the lock of aluminium filter and remove it.
NOTE:
• Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
When activated carbon filter attached, the suction power will be lowered.

BULB REPLACEMENT

Important :

LED LIGHTS

Use the screw driver loosen the ST4*8MM self-tapping screw (2pcs)
from the lighting panel, take out the lighting fixture. Open the terminal
box that connected with the wire, disconnect the wire connector and
replace the lamp.
• ILCOS D code for this lamp is: DBS-2/65-H-120/33
– LED modules –rectangle lamp
– Max wattage: 2 W
– Voltage range: AC 220-240V
•
The bulb must be replaced by the manufacturer, its service agent or
similarly qualified persons.
•
Always switch off the electricity supply before carrying out any operations
on the appliance. When handling bulb, make sure it is completely cool down
before any direct contact to hands.
•
When handling globes hold with a cloth or gloves to ensure perspiration
does not come in contact with the globe as this can reduce the life of the
globe.
-35-