Jocel JCEI60-007551 Manual De Instrucciones página 32

3. Install the hook on a suitable place once the installation height is fixed and keep it in line. The fixed
position of the inside chimney bracket is the place of chimney. See pic 2.
4. Fix the outside chimney bracket on the outside chimney and be sure that the inside chimney can be
adjusted the height in it freely as well as fixing the expansion pipe. Afterwards, install the expansion
pipe and chimney on the cooker hood. See Pic 3.
5. Put the cooker hood on the hook. See Pic 4.
6. Adjust the height of the inside chimney to the position of the inside chimney bracket and fix on it by
screw, after adjusting the position, fix the body with safety screw. See Pic 5.
Note: The two safety vents are positioned on the back housing, with diameter of 6mm.Lay the expansion
pipe to the wall outlet. Fix the expansion pipe with the cable tie on the wall-outlet if it is aluminium foil
pipe.
-31-