Residual Heat Display; Booster Function (Power Level) - Blaupunkt 5IX60290 Instrucciones De Uso

RESIDUAL HEAT DISPLAY

After the cooking zones or hob have been switched off, the residual heat of the cooking zones
that are still hot is displayed with an [ H ]. The [ H ] will disappear if the cooking zones can be
touched safely. As long as the residual heat display is lit, the cooking zones should not be
touched and no heat-sensitive objects should be placed on them: Risk of burns!

BOOSTER FUNCTION (POWER LEVEL)

All cooking zones are equipped with a booster function, i.e. with power amplification. The
booster function is displayed with [ P ]. If they are switched on, these cooking zones operate
for a period of 10 minutes. This high power is intended to enable you to do things like quickly
heating large quantities of water, to boil water for pasta for example. After the appliance has
automatically switched back after 10 minutes, you should not switch back to the booster.
The appliance could overheat and will trigger a safety shutdown.
Switching booster on/off:
Operation
Switch on booster
Switch off booster
Management of the maximum power:
The hob is equipped with a maximum power level. To ensure that this maximum power is not
exceeded, the electronics automatically reduce the cooking level of another cooking zone when
the booster function is activated. This cooking zone will then display the reduced power [ 9 ] by
flashing.
Selected cooking zone
[ P ] lights up
Operating panel
Slide your finger over the
Smart Slider or press the end
immediately
Slide your finger over the
Smart Slider or press the end
immediately
Other cooking zone (e.g.: Power level 9)
[ 9 ] is reduced to [ 6 ] or [ 8 ] and flashes
12
Display
[ P ]
[ 9 ] to [ 0 ]