Technical Specifications - FONESTAR ZS-2000M Manual De Instrucciones

9.- Power supply switch: turns on and off the main power supply.
10.- Grounding terminal screw: connects to the grounding wires.
11.- AC power: main power supply connection.
12.- DC power: DC power supply connection (DC 24V), respectively connect input ("+24V", GND) and
output ("+24V", "GND"), from left to right.
13.- 100V input terminal: connects to the 100V power amplifier output..
14.- 100V output terminal: connects to the 8 loudspeaker circuit outputs and upper and lower parallel
ports..
15.- 10M/100M network interface: 4 ports 10M/100MB Ethernet switch.
16.- Phantom Power/Gain: used to set the phantom power or gain of the AVC inputs.
17.- AVC inputs: 4 AVC input interface terminals.

TECHNICAL SPECIFICATIONS

CHARACTERISTICS
POWER SUPPLY
DIMENSIONS
ZS-2000M
PA and EN 54 PAVA alarm system control unit
8 loudspeaker zones.
Extendable to 2,000 zones maximum with ZS-2000M.
Monitoring of 8 loudspeaker lines (A+B).
Monitoring of ZS-200M microphones.
100 V line switching with two operating modes: connection for 1 amplifier per audio
source or connection for 1 amplifier for every 2 zones distributed to 8 output zones for
loudspeakers.
Message player with 512 MB storage capacity.
Error register and storage.
EN 54-16 certified.
8 inputs and 8 outputs through contact closure.
100-240 V AC, 120 W and 24 V DC, 2.5 A
483 x 88 x 425 mm fondo. 2 U rack 19"
- 13 -
EN