EN
WIRELESS CONNECTION OF 2 SPEAKERS
This speaker can be connected wirelessly to another speaker from the same series by following the steps
described below:
1.- Turn on both speakers and select wireless mode.
2.- Long press the PLAY/PAUSE button until you hear a beep. This speaker will be the MASTER
speaker and will play the left channel (L) of the stereo signal.
The other speaker will be the secondary speaker (SLAVE) and will play the right channel (R) of the
stereo signal.
3.- Connect your wireless audio device to the MASTER speaker and you will hear another beep
indicating that it has been successfully connected.
TECHNICAL SPECIFICATIONS
FEATURES
AMPLIFIER
PROTECTION
LOUDSPEAKERS
RESPONSE
INPUTS
OUTPUTS
INDICATORS
CONTROLS
SUSPENSION POINTS
POWER SUPPLY
DIMENSIONS
ASB-12150U
Active speaker with extra resistant injection box.
USB/SD/MP3 player with remote control.
Carrying handles, suspension points, floor supports and monitor-shaped.
360 W maximum, 180 W RMS
Bass: 300 W maximum, 150 W RMS
Treble: 60 W maximum, 30 W RMS
3 protection circuits: short circuit, overload and temperature
1x12" woofer: 50 mm voice coil and ferrite
magnet
1 compression driver: 1 3/8" diaphragm
50-18,000 Hz
1 balanced mic, combo (XLR and 6.3 mm jack)
1 amplified for passive loudspeaker, 8 Ω speaker connector
Operation on the front and power, pico and bluetooth on the rear panel
230/115 V AC, 250 W
375 x 585 x 330 mm depth
ASB-15180U
Output for passive loudspeaker.
Woofer protected by front metal grille.
Hole in the base for a 35 mm tube.
440 W maximum, 220 W RMS
Bass: 380 W maximum, 190 W RMS
Treble: 60 W maximum, 30 W RMS
1 x 15" woofer: 63.5 mm voice coil and
ferrite magnet
1 compression driver: 1 3/8" diaphragm
42-18,000 Hz
3 balanced mics, XLR
1 auxiliary line, 2 x RCA
1 auxiliary line, 2 x RCA
Input volume and overall volume
Input selector: line / MP3
Player control
Effects: delay and echo
5-band graphic equalizer
4 points M8
230/115 V AC, 350 W
460 x 685 x 380 mm depth
- 6 -