Basic Operation - NORAUTO 2201427 Manual

II. BASIC OPERATION:
EN
1. Hang up button / Previous track / Search (
i. Once Bluetooth is connected, and you receive a call, press this button to hang up.
ii. In radio broadcast mode, press this button to scan backwards for radio stations in
increments, hold it to scan for radio stations automatically, press any button between 1
and 6 to save as a preset station.
iii. In MP3 playback mode, press and hold to skip forward one track, and keep holding to
fast reverse.
2. Power Switch / Mode Switch (
i. Once the device is powered up, press this button to turn the device on, and press again
to turn it off.
ii. Once the device is turned on, press the MOD button to switch between modes. When
a flash disk and a Micro SD card are connected to the main unit, press the button, the
main unit will switch between USB, SD, AUX IN and BT modes. When no USB or SD
card is connected to the main unit, press the button, the main unit will jump to the next
function and there will be no mode for connection.
3. Volume control / Audio adjustment / PTY (VOL/SEUPTY) function button
i. In radio broadcast and playback mode, turn the volume dial to adjust the volume level. Increase the volume clockwise and decrease the volume counterclockwise. The volume
value ranges between 0-43 and the default value is level 20.
ii. When the device is turned on, press this button for automatic audio tuning selection:
BASS / TRE / BAL / FAD / EQ / LOUD / DX/LOC / STERO/MONO / CLOCK 12/24 /
AREA EUR/USA per sequence, and the volume dial can be turned to adjust the tone
modes.
iii. In radio broadcast mode, hold this button to enter the AF ON / TA OFF / TAVOL 25 /
REG OFF / EON OFF / SEL PTY function selection mode.
4. Clock button (CLK)
Hold this button to display the clock, and it will automatically clear 5 seconds later. Hold it
again for 2 seconds to enter the clock setting mode, and turn the volume dial to adjust the time
minute by minute clockwise and hour by hour counterclockwise, and the time will be confirmed
automatically 5 seconds later and will exit the setting.
5. Pick up button / Next track / Search (
i. Once the Bluetooth is connected, and you receive a call, press this button to answer.
ii. In radio broadcast mode, press this button to scan for radio stations forwards in
increments, hold it to scan for radio stations automatically, press any button between 1
and 6 to save as a preset station.
iii. In MP3 playback mode, press and hold to skip forward one track, and keep holding to
fast forward.
6. Display screen (LCD)
Displays the radio frequency and current playback information.
7. USB Interface (USB)
Insert a USB flash drive, and songs of the corresponding format will be played automatically.
8. Auxiliary input jack (AUX)
It is used for the external connection for audio signals.
9. Micro SD card slot (SD)
Insert a Micro SD card, and songs of the corresponding format will be played automatically.
10. MIC BT Microphone Bluetooth (MIC).
During the Bluetooth communication process, sound enters through here.
50
)
)
)