Bluetooth Operation - NORAUTO DX AV-212DBT Manual De Instrucciones

BLUETOOTH OPERATION

1. Matching of phone and host
When the Bluetooth icon on the display screen turns blue after firstly bringing the mobile
phone close to the host, turning on the Bluetooth function of the mobile phone, finding the
Bluetooth name "DX AV-212DBT" (password: 0000) of the host through the mobile phone
and then connecting them, it means that the host has been successfully connected with
the mobile phone Bluetooth.
2. Dialling via Bluetooth
After the Bluetooth connection is completed, the call can be made through mobile phone
dialling after pressing the "
can be operated through the number keys on the interface and the keys on the remote
control.
3. Answering calls via Bluetooth
After the Bluetooth connection is completed, when a call comes in, it can be answered
after the " " key is pressed on the panel. If you want to switch the call voice, the call
switch between the host and the mobile phone can be achieved after long pressing the
"Function Selection" key to enter the interface for calling via Bluetooth, adjust the volume
knob to move the box to the "
key. The call can be hung up after shorting press the "
is over.
4. Music play via Bluetooth
The host will play the music on the phone synchronously after pressing the "
switch to the Bluetooth music mode after the Bluetooth connection is completed, turning
on the music player software of the phone and clicking play. Press the "
panel to select forward music selection, press "
music selection, and press the "
SCHEMATIC DIAGRAM OF INSTALLATION AND DISASSEMBLY
Schematic diagram of installation
1.
• The host will be placed as per the installation
position before installing the host, which
shall be connected to the corresponding
horn wire and power line.
• The host can be fixed after the host running
effect is satisfactory.
2. Install the host
• Install the bracket on the instrument panel
of the vehicle and bend the part of the card
position of the bracket.
• Connect the power line and horn wire, and
fix the stator on the vehicle.
• Push the host into the bracket, and tighten the fixing nuts of stators.
3. Uninstall the host
• Loosen the fixing nuts of stators. Insert two pieces of disassembly keys into the gaps on
the left and right sides at the same time, hook the disassembly key to the host and pull
it out gently to make the machine separate from the bracket. Then, remove the power
line and horn wire, and unplug the antenna plug.
" key to switch to the Bluetooth phone mode. Or the call
" icon, and then short pressing the "Function Selection"
" on the panel to select downward
" key on the panel to pause play.
Bracket
Disassembly key
" key on the panel after the call
" key to
" key on the
Stator
Double-threaded
Cooling fin
EN
53