Removing the lining
H1
H2
• ENGLISH •
REPLACING THE 5-POINT HARNESS
Clip the buckle. Check that is it correctly assembled by
G6
tightening and loosening the 5-point belt (harness).
E8
Loosen the harness and remove the reducer if it is
being used.
Lift up the headrest to the highest position.
Detach the side press studs which hold the fabric
to the backrest.
Remove it, carefully pulling the fabric off from the
D4
headrest.
Remove it, carefully pulling the fabric off from the
frame, starting from one side, being careful while
removing the fabric from the lap belt guide.
Remove the leg separator harness from the lining
and take off the fabric
F1
80