Measurement Of Area; Measurement Of Volume; Indirect Measurement - Two-Point Pythagorean - Chauvin Arnoux CA 1730 Manual De Instrucciones

4.3.MEASUREMENT OF AREA

1: Press the
2: Press
the length.
3: Press
the width.
The calculated area is indicated in the last row. The individual measurements
are recalled in rows 1 and 2, and the perimeter is displayed in row 3.

4.4.MEASUREMENT OF VOLUME

1: Press the
2: Press
the length.
3: Press
length.
4: Press
height.
The measurement results, length, width, height, and volume, are displayed
in that order.
4.5.INDIRECT MEASUREMENT - TWO-POINT
PYTHAGOREAN
The indirect measurement is used to determine a distance using auxiliary
measurements. For example, a height can be measured by measuring
two other distances.
The target points must be on the same line. The orientation of the LASER
during the measurement of the second distance must be perpendicular
to the line.
key, the symbol is displayed.
twice to make the first measurement, for example
again to make the second measurement, for example
key until the
twice to make the first measurement, for example
again to the second measurement, for example the
to make the third measurement, for example the
symbol is displayed
24