Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
13.
a.
Place the valve outlet hose into a bucket or suitable container. Slowly turn on the hot and cold supplies.
Slowly position the valve lever to the full cold ON position. Let the water run for one minute to remove any
debris. Rotate the valve lever to the full hot position. Let the water run for one minute to remove any debris.
Turn the valve lever to the OFF position.
b.
Slide the weight onto the spray hose. Verify that the hose ends are clean and that the O-ring is in place.
Fully engage the hose ends. Extend and retract the spray hose to check for smooth operation. Reposition
the supply hoses if necessary.
1491211-2-A
7 of 20
Pulldown Kitchen Faucet
INSTALLATION
Weight
Spray Hose
O-Ring
Valve Outlet Hose
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Tabla de contenido
