Idiomas disponibles
Idiomas disponibles
6.
Before assembling the lock bars remove the key from the lock.
horizontally with the indented formation in the one end pointing to the
inside
brackets.
Position the square hole in the center plate over the lock while the
center plate is still in the horizontal position.
Secure the center plate to the lock with the nut.
Insert the key into the lock and try the locking mechanism. Lubricate
the tips of the lock bars if necessary.
Please note that the key only comes out of the lock only when it is in
the locked position.
Figure 6
7.
from the foam rests. For help in doing this, pinch the end of the foam
to help secure the adhesive to the foam.
Barrel rests
36"
Bottom pad
r sides of the cabinet at the height
Figure 7
4328-2206
3
15
