Champion Global Power Equipment 92001i-EU Manual Del Operador página 12

92001i-EU 1900W RATED PORTAbLE INvERTER GENERATOR
ASSEMbLY
Your generator requires some assembly. This unit ships from
our factory without oil. It must be properly serviced with fuel
and oil before operation.
If you have any questions regarding the assembly of
your generator, call our Technical Support Team at
+44 (0)1942 715 407. Please have your serial number and
model number available.
Unpacking
1. Set the shipping carton on a solid, flat surface.
2. Remove everything from the carton except the generator.
3. Using the carrying handles of the unit, carefully remove
the generator from the box (two people lifting is
recommended).
Add Engine Oil
DO NOT attempt to crank or start the engine before it has
been properly filled with the recommended type and amount
of oil. Damage to the generator as a result of failing to follow
these instructions will void your warranty.

The generator rotor has a sealed, pre-lubricated ball bearing
that requires no additional lubrication for the life of the bearing.

The recommended oil type for typical use is 10W-30
automotive oil.
If running generator in extreme temperatures, refer to the
following chart for recommended oil type.
Recommended Oil Type / Tipo de aceite recomendado / Type d'huile recommandé
5W-30
5W-30 Synthetic / Sintético / Synthétique
°F -20 0 20
°C
-28.9 -17.8 -6.7
Ambient temperature / Temperatura ambiente / Température ambiante
1. Place the generator on a flat, level surface.
2. Loosen the cover screws and remove the maintenance
cover.
CAUTION
NOTICE
NOTICE
10W-30
10W-40
40 60 80 100
4.4 15.6 26.7 37.8
3. Remove oil fill cap/dipstick to add oil.
4. Using a funnel, add up to 500ml/16.9 fl.oz of oil (included)
and replace oil fill cap/dipstick. DO NOT OVERFILL.
5. Check engine oil level daily and add as needed.
Once oil has been added, a visual check should show oil
about 1-2 threads from running out of the fill hole.
120
When using the dipstick to check oil level, DO NOT screw in
48.9
the dipstick while checking.
Check oil level often during the break-in period. Refer to the
Maintenance section for recommended service intervals.
12
MAX
NOTICE

NOTICE

ASSEMbLY
OIL DIP STICK