1.2. Power cord and other cables
Do not tangle the cord or pull it to discon-
nect the appliance. also, keep the cord
away from warm surfaces.
Never use the appliance if it has a damaged
cable or socket.
Take it to the Customer Support Service for
replacement.
1.3. Humidity and Water
Do not use your appliance in humid places.
Do not allow the appliance to become wet
under any circumstances as this may be
dangerous. To avoid fire hazard or electric
shock do not expose your appliance to hu-
midity or water. furthermore, do not place
your appliance under water (e.g. for clea-
ning).
1.4. cleaning
Before cleaning, be sure to switch off the ap-
pliance and remove the plug from the main
power supply. always allow the unit to cool
down before cleaning.
To clean the exterior of the product, use a
dry soft cloth only.
1.5. General Precautions
• Please follow the instructions in the user
manual which help to properly install and
operate this product and enjoy its advan-
ced features. Please keep the instructions
for future reference.
6
induction hob
• Read all instructions before using the pro-
duct.
• Maintenance and service operations are
only to be carried out by authorized pro-
fessionals.
• Any damage caused by manual modifica-
tions to the product is not covered by the
warranty.
• If this product is used for other purposes
than the ones originally intended, or if it is
not correctly connected, the product may
become damaged and the warranty will be
voided.
• Read these instructions carefully before
installing or using this appliance.
• No combustible material or products should
be placed on this appliance at any time.
• Please make this information available to
the technician responsible for installing the
appliance as it could reduce your installa-
tion costs.
• In order to avoid a hazard, this appliance
must be installed according to these ins-
tallation instructions.
• This appliance must be properly installed
and earthed by a suitably qualified techni-
cian only.
• This appliance should be connected to a
circuit which incorporates an isolating swi-
tch providing full disconnection from the
power supply.
EN
KIH3300
7