Adjusting The Saw Blade Tilt; Maintenance And Cleaning Instructions; Replacing The Saw Blade - VITO PRO-POWER VISCB20 Manual De Instrucciones

Adjusting the saw blade tilt

1. Unscrew the fixing knob at the rear;
2. Unscrew the fixing knob at the front;
3. Adjust the saw blade tilt according to the scale;
4. Tighten both knobs;
1.
2. and 3.

MAINTENANCE AND CLEANING INSTRUCTIONS

The table saw was conceived to operate over a long
period of time with a minimum of maintenance. For a
continuous and trouble-free operation, you must
perform regular cleaning and proper maintenance
tasks.
Before inspecting, performing any maintenance or
cleaning, turn off the table saw and unplug the power
cord.

Replacing the saw blade

1. Remove the dust collection hose (6) and the blade
guard (3);
2. Remove the 6 screws and the plate from the
table/saw blade;
3. Raise the saw blade (4) to its maximum height;
4. Use the hex wrench to loosen the nut that holds the
saw blade;
This nut is left-hand threaded, as such it can be
loosened counter-clockwise.
5. Remove the nut and washer;
6. Replace the saw blade by placing it in the correct
position;
7. Proceed in the opposite order to complete this
procedure.
2.
4. 5. and 6.
43