Carrying Handle; Front And Side Guide Rails; On/Off Switch And Plug - VITO PRO-POWER VISCB20 Manual De Instrucciones

Carrying handle

Attach the carrying handles (15) to the front legs using
2 hex screws, 2 plate washers, 2 spring washers and 2
nuts for each handle.

Front and side guide rails

Screw the front guide rail to the front of the appliance
using 4 hex screws, 4 plate washers, 4 spring washers
and 4 nuts.
1. Insert 4 hex screws into the slot of the front guide
rail;
2. Install the front guide rail on the front of the
appliance by inserting the screws into the holes;
3. Install plate washers, spring washers, nuts and
tighten them.
Screw the side guide rail to the side of the appliance
using 3 hex screws, 3 plate washers, 3 spring washers
and 3 nuts.
4. Insert 3 hex screws into the slot of the side guide rail;
5. Place the side guide rail on the side of the appliance
by inserting the screws into the holes;
6. Install plate washers, spring washers, nuts and
tighten them.

ON/OFF switch and plug

Screw the ON/OFF switch (11) and power plug into the
right front leg, using two screws.
Miter
gauge
guide rail
Front guide
rail
Side guide
rail
39