Maintenance And Cleaning; Technical Assistance - VITO PRO-POWER VISCB20 Manual De Instrucciones

Clothing worn during the appliance operation must be
adequate, tight and closed, for example, a work boiler
suit. Do not wear loose clothing or jewelry. Keep hair,
clothing and gloves away from moving parts.
Never use the power tool if the safety devices are
missing, inhibited, damaged or worn out;
The following precautions and procedures should also
be followed to avoid accidents:
▪
The rotary accessories speed of the table saw must
be at least equal to the maximum speed stated in the
technical specifications;
▪
When using the table saw, place yourself in a stable
position and always keep your balance.
workpiece firmly and use the provided push stick to
ensure continuous
unexpected situations, such as kickback;
▪
The kickback is a sudden reaction that happens when
the power tool is switched on and the rotary
accessory gets jammed or is tightened;
▪
The kickback occurs due to an incorrect use of the
power tool or an improper working procedure which
can cause serious injuries to the user. Loss of control
can result in serious injury.
▪ Never place your hands near the rotating saw blade.
Keep your hands away from the rotating accessories;
▪ When the rotating accessory gets stuck, switch off
the power tool. If you lose the control of the power
tool, disconnect the power cord;
▪ To avoid displacements or projections use a fixing
device or a bench vice to ensure a safe performance;
Place/maintain the workpiece in a correct and stable
position;
▪ Make sure that the ventilation slots are not clogged
while operating. Do not place any objects over the
slots;
Hold the
operation and withstand
▪
The saw blades may get too hot during operation.
Avoid touching them, they can cause severe burns;

Maintenance and cleaning

Before performing cleaning, adjusting, repairing and
maintenance work, the power cord must be unplugged
from the socket.
Replace worn out or damaged parts immediately, so
that the power tool is always in a safe operating
condition.
Cleaning:
The power tool must be carefully cleaned after each
use.
Do not use aggressive cleaning products. These
products may damage
compromising the safe operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out; all other works must be
performed by an official dealer.
Keep all nuts and screws well tightened in order to
ensure a safe operation.
If any components or safety devices are removed for
maintenance tasks, they must be repositioned
immediately and correctly.
Use only VITO-approved tools for this appliance or
technically identical parts. Failure to do so may result in
personal injuries or damages to the table saw. If in
doubt, if you lack knowledge or resources, you should
contact an official dealer.

Technical Assistance

Your table saw should only be serviced by the
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts.
plastics and metals,
37