1. Owner's liability
This tool was developed and manuf-
actured according to the technical
norms and standards valid at the time and
is considered to be operationally reliable.
Nevertheless, the tool may present a danger
when it is not used as intended or used in an
inappropriate way by non-qualified personnel.
Please make sure that any person using this
tool or carrying out maintenance work carefully
reads and fully understands these operating
instructions before using the tool.
• Modifications of any kind or any additions
or modifications to the tool are prohibited.
• All safety instructions, warning and operati-
on notices on the tool must be kept legible
at all times. All damaged labels or stickers
must be replaced immediately.
• All specified installation values or setting
ranges must be observed.
• Keep the operating instructions together
with the tool at all times.
• The tool may only be used if it is in good
working order.
• Safety equipment must always be within
easy reach and should be checked regu-
larly.
14
2
For your safety
Always wear personal protective equipment!
2. Intended use
Operational reliability is only guaran-
teed if the device is used as intended
in accordance with the information provided
in the operating instructions. In addition to the
safety advice in these operating instructions,
the general safety regulations, regulations for
the prevention of accidents and regulations
for environmental protection valid for this
tool's application range must be observed
and respected.
Use and maintenance of the tool must always
comply with relevant local and national regu-
lations.
• This HAZET tool is ideally suitable for wor-
king on motor vehicles, motorcycles, agri-
cultural machinery. Its also designed for
universal use in cooling systems of engines
or other types of generators with cooling
water systems.
• Any deviation from the intended use and/or
any misapplication of the tools is not permit-
ted and will be considered as improper use.
• Any claims against the manufacturer and/
or its authorised agents because of damage
caused by improper use of the tools are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the operator.
• Ensure optimum use of the cooling system
with the HAZET cooling system cleaner.
• Engine coolant decomposes over time, lea-
ding to contamination with abrasion parti-
cles and foreign bodies.
• Prevent this by flushing out the cooling sys-
tem occasionally and when replacing parts
of the cooling system. The HAZET cooling
system cleaner functions without the use of
solvents or aggressive chemicals.
• HAZET cooling system cleaner combines
water with compressed air to increase per-
formance. The compressed air increases
the water pressure in relation to water that
comes from the water mains.