For Your Information; Explanation Of Symbols; General Information - Hazet-Werk 9048 P-2/3 Manual De Instrucciones

1. General information

• Please make sure that the user of this tool
carefully reads these operating instructions
and fully understands all the information
provided before using the tool for the first
time.
• These operating instructions contain impor-
tant advice that is necessary for safe and
trouble-free operation of your HAZET tool.
• For intended use of the tool, it is essential
that all safety and other information in these
operating instructions is adhered to.
• For this reason, always keep these opera-
ting instructions together with your HAZET
tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasises
that any modification to the tool and/or use
in a way that does not correspond to its
intended application is strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper or inappropriate application,
misuse of the tool or a disregard of the safe-
ty instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents in the application range of this tool
must be observed and respected.
; Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[ +49 (0) 21 91 / 7 92-0 • \ +49 (0) 21 91 / 7 92-375 • ^ hazet.de • ] [email protected]
1

For your information

HAZET-WERK Hermann Zerver GmbH & Co. KG
Always wear personal protective equipment!

2. Explanation of symbols

ATTENTION: Pay strict attention to these
symbols!
READ THE OPERATING INSTRUCTIONS!
The owner of this tool is obli­
ged to observe the operating
instructions and instruct any
users of this tool according to
the operating instructions.
NOTE!
This symbol indicates advice
that is helpful when using the
tool.
WARNING!
This symbol indicates impor­
tant descriptions, dangerous
conditions, safety risks and
safety advice.
CAUTION!
This symbol indicates advice
which, if disregarded, results
in damage, malfunction and/
or functional failure of the
tool.
QUALIFIED PERSONNEL!
The tool may only be used by
qualified personnel. Handling
by non­qualified people may
lead to injuries to persons or
damage to the tool or work­
piece.
13