STORZ & BICKEL Mighty Modo De Empleo página 17

4.
5.
6.
7.
8.
C L E A N I N G / H Y G I E N E
When cleaning the
Cooling Unit Cap in
isopropyl alcohol, remove
the Cap Lock by pulling it
up on one side.
Unscrew the Cooling Unit
base from the Vaporizer by
turning it 90° counterclock-
wise.
Lever out the large Base
Seal Ring with Filling
Chamber Tool at the
recess in the groove.
Remove the small Base
Seal Ring.
Press the Screen with the
Filling Chamber Tool from
the top to the bottom out
of the Cooling Unit base.
Place all parts of the Cool-
ing Unit in warm rinsing
water.
Alternatively: Soak all
parts of the Cooling Unit
(except cap lock) in isopro-
pyl alcohol for a maximum
of 1/2 hour.
Rinse all parts under
running water for at least
one minute. Let all parts
dry completely.
17
en