Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Tire Buffer
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Intended Use
Power tool equipped with slip chuck and 3/8 in.-24 adapter
for use with various rasps for tire repair - No other use is per-
mitted.
Use
Installation / Operation
1.
Fix the accessories properly to the tool.
2.
Connect device as shown in Fig. 01.
3.
To start the machine, pull the trigger (A). Machine
speed is increase by increasing pressure on the trigger.
Release the trigger to stop.
Maintenance instructions
• Follow local country environmental regulations for
safe handling and disposal of all components.
• Maintenance and repair work must be carried out by
qualified personnel using only original spare parts. Con-
tact the manufacturer or your nearest authorised dealer
for advice on technical service or if you require spare
parts.
• Always ensure that the machine is disconnected from en-
ergy source to avoid accidental operation.
• Disassemble and inspect the tool every three 3 months
(500 hours) if the tool is used every day. Replace dam-
aged or worn parts.
• The safety screw should be replaced when damaged, and
in any case replaced during maintenance operations (ev-
ery 500 hours).
• To keep downtime to a minimum, the following service
kit is recommended : Tune-up kit
Disposal
1.
The disposal of this equipment must follow the legisla-
tion of the respective country.
2.
All damaged, badly worn or improperly functioning de-
vices MUST BE TAKEN OUT OF OPERATION.
Useful Information
Safety Data Sheet
The Safety Data Sheets describe the chemical products sold
by Chicago Pneumatic.
Please consult the Chicago Pneumatic website for more in-
formation qr.cp.com/sds.
Country of Origin
Taiwan
Copyright
© Copyright 2022, CHICAGO PNEUMATIC Tool Co.LLC,
1815 Clubhouse Road, Rock Hill, SC 29730 - USA
All rights reserved. Any unauthorized use or copying of the
contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and
drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability.
Caractéristiques techniques
Données de l'outil
CP873C-HD
CP873C-HDES
Pression de service maximum
6.3 bar / 90 psig
Déclarations
DÉCLARATION DE CONFORMITÉ UE
Nous, CHICAGO PNEUMATIC Tool Co.LLC, 1815
Clubhouse Road, Rock Hill, SC 29730 - USA, déclarons
sous notre seule et entière responsabilité que le produit (dont
le nom, le type et le numéro de série figurent en première
page) est en conformité avec la ou les directives suivantes :
Normes harmonisées appliquées : EN ISO 11148-9: 2011
© Chicago Pneumatic - 8940177136
Safety Information
Vitesse
Arrivée
Poids
libre (tr/
d'air (")
(kg)
min)
3500
1/4 NPT 1.05
3500
1/4 NPT 1.16
Poids (lb
)
2.31
2.56
7
Tabla de contenido
