S01 Tab Settings; Real Time Clock Settings - Ingersoll Rand System Automation X4I Manual De Configuración Rápida

S01 TAB SETTINGS

1. Scroll up (+)
until the S01 page is highlighted.
Figure 1 – S01 Screen
2. Press the enter
selection. The cursor should be flashing on line
01 Ct.
User Configuration Home Screen

REAL TIME CLOCK SETTINGS

1. From the S01 home screen scroll up (+)
or scroll down (-)
highlight 01- Ct (Real Time Clock).
Real Time Clock Setting
2. The default setting for this parameter is - --.--,
which indicates the Real Time Clock has not
been initialized. The format for the Real Time
Clock is as follows.
All manuals and user guides at all-guides.com
or scroll down (-)
button to confirm your
to move the cursor to
The 'Day of the Week' (1= Monday to
o
7=Sunday) which is automatically
calculated and set in accordance with
the Day, Month and Year entered
The Hours and Minutes (displayed in
o
Military Time)
The Day, Month, and Year
o
3. Press the enter
Time Clock setup screen. The flashing cursor
should be displayed highlighting the Hours dash.
This sets the Hour for the Real Time Clock. The
values for this parameter are "00" to "23".
4. Scroll up (+)
until the value is set for the correct Hour for the
Real Time Clock. Press the enter
accept this parameter. The flashing cursor
should be displayed highlighting the Minutes
dash. This sets the Minutes for the Pressure
Schedule. The values for this parameter are "0"
to "59".
5. Scroll up (+)
until the value is set for the correct Minute for
the Real Time Clock. Press the enter
to accept this parameter. The flashing cursor
should be displayed highlighting the Day dash.
This sets the Day for the Real Time Clock. The
values for this parameter are "1" to "31".
6. Scroll up (+)
until the value is set for the correct Day for the
Real Time Clock. Press the enter
accept this parameter. The flashing cursor
should be displayed highlighting the Month
dash. This sets the Month for the Real Time
Clock. The values for this parameter are "1" to
"12"
7. Scroll up (+)
until the value is set for the correct Month for
the Real Time Clock. Press the enter
to accept this parameter. The flashing cursor
should be displayed highlighting the Year dash.
This sets the Year for the Real Time Clock. The
values for this parameter are "2005" to "2100".
8. Scroll up (+)
until the value is set for the correct Year for the
Real Time Clock. Press the enter
accept this parameter. You should be returned to
the S01 home screen and values just entered
should appear next to the Ct parameter.
14
button to display the Real
or scroll down (-)
button to
or scroll down (-)
button
or scroll down (-)
button to
or scroll down (-)
button
or scroll down (-)
button to