Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4
INSTALLATION
ATTENTION! Before proceeding with installation and commissioning of the appliance,
read the following carefully.
4.1 Storage
In the event that the appliance is not immediately installed in the place of use and it is necessary
to temporarily store it, it should be stored in a safe place that respects the following characteristics:
•
the place chosen for the temporary storage of the device is a closed environment, protected
from the sun and from weathering;
•
the temperature of the storage place is between 5°C and 40°C, with relative humidity between
30% and 90%;
•
if the appliance must remain in storage for a long time before being installed, it is advisable to
keep it in its original packaging to ensure more adequate protection.
4.2 Choice of installation point
Considering the function of the grinder, it is advisable to PLACE IT near the coffee machine.
Before proceeding with installation of the device, also make sure that the installation point meets
the following requirements:
•
The surface intended for positioning of the appliance must be flat, well levelled and sufficiently
robust to support its weight;
•
The space available must be large enough to allow correct installation and easy use of the
appliance;
•
The appliance must not be installed near sinks and/or taps that can wet it with jets and/or
splashes of water;
•
The place of use is sufficiently lit and well ventilated;
•
A socket is provided near the installation point for the electrical connection of the appliance in
compliance with the regulations in force in the country of use.
ATTENTION! The socket must be equipped with an efficient earthing system.
ATTENTION! The electrical power supply system must also be equipped with a safety
magnetothermic switch placed upstream of the socket in a known position that can be
easily reached by the user in order to protect the appliance from overloads and sudden
changes in voltage and the user from the risk of electrocution.
4.3 Unpacking and handling of the appliance
After opening the packaging, carefully check that the appliance is intact and that there are no
damaged parts.
•
Open the packaging near the installation point, ensuring there is sufficient space to handle the
appliance safely.
•
Remove the appliance from the packaging, gripping it firmly and safely.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
EN
39 / 102
Tabla de contenido
