Identification Of The Main Parts Of The Grinder; Intended Uses; Technical Features - Fiorenzato All Ground Manual De Instalación, Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN

2.3 Identification of the main parts of the grinder

The
grinder consists of a machine body and a supply hopper on the top to load
the roasted coffee beans before grinding them. With reference to Fig. 2, the
consists of the following parts:
1. Hopper lid.
2. Coffee beans hopper.
3. Shutter on hopper.
4. Ring nut for grinding size adjustment.
5. Locking/unlocking ring nut pin.
6. Removable chamber with upper grinder.
7. Machine/user interface display.
8. Removable ground coffee dispensing tube.
9. Adjustable filter holder cup support fork.
10. Machine on/off switch.

2.4 Intended uses

This appliance has been designed exclusively for the grinding of roasted coffee beans. Any
other use is to be considered improper and therefore dangerous. The manufacturer declines all
responsibility for any damage due to improper or incorrect use. Do not use the appliance to grind
other types of food or other granular materials.

2.5 Technical features

The table (Fig. 3) summarises the
Dimensions [W x D x H mm]
Weight [kg]
Power supply
Power [Watts]
Type of grinders
Grinder diameter [mm]
Rpm grinder rotation speed
Dose adjustment
Hopper load capacity [g]
34 / 102
coffee grinder's specific technical characteristics.
Fiorenzato | Cod. AllGround_001 Ed. 01/2021
grinder
169 x 240 x 442
9
220-240V - 50 Hz
250
Flat - Red speed
64
1400 a 50 Hz
1600 a 60 Hz
in seconds
250
Tabla de contenido
loading

Tabla de contenido