Tabla de contenido
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
6. Keep the cutting blades always sharp, avoiding
the grass to be thrashed and not cut. Blunt blade
cutting favours diseases attack, sometimes
of difficult control, leaving the grass with an
irregular and brown aspect.
7. Another care that should be taken during lawn
mowing is the cutting direction, that should be
alternated, avoiding soil compactation. Soil
compactation reduces the oxygen available
for the roots and hampers its normal growth. In
some cases, it may ruin the grass. For instance,
if this time you mow the lawn in North-South
direction, the next one should be East-West
direction, and so on.
8. What should be done with the straw: leave it on
the lawn or take it away? By one way, as it decays,
it renders back to the soil the nutrients previously
extracted from it. On the other hand, gathering the
straw provides more aeration and luminosity to
Recommendations
for Good Recycling
For optimal performance of the recycling machine
when cutting the grass, please observe the
following:
Always cut the grass when it is dry.
Ideally, the grass should be 8 cm high, allowing a
right cut and perfect recycling.
If the grass is higher than 8 cm, cut it twice.
Adjust the height so that just 1/3 of the grass is cut
and recycled.
the soil (which are necessary for the development
of the lawn) and the temperature and humidity
are lower, thus reducing the risks of diseases,
and even improving its aspect. With TRAPP grass
catcher simplified installation system, you may
choose the best option for you.
9. Avoid mowing the lawn early in the morning,
when there is still a lot of dew on it. Besides
facilitating the appearance of diseases, it is also
for safety reasons.
10. As a final touch, you may also beautify your
garden alternating the height of the grass in
different strips. TRAPP lawn mower's easy and
quick regulating system allows you to change
the cutting height without the need of tools. The
final visual effect is the same as we usually see in
soccer fields, i.e., stripes or checkered designs in
different green tones.
Care to be Taken with
the Recycling Machine
The cutting blade must always be sharp.
After use, clean the mower. Grass and other debris
inside the machine can impair the good performance
of the machine and incorrectly cut the grass.
47
Tabla de contenido
