Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Machines with grass-holder - clockwise sense.
Machines with grass-holder and side outlet -
anti-clockwise sense.
TRAPP cutting blade are temperate to provide
long lasting durability.
Use
protective
disassemble cutting blade.
For perfect mow/cut, blade must always be
sharpened.
When lawn mower demonstrates excessive
vibration, stop immediately by releasing switch
lever, turn off lawn mower removing plug from
electrical socket and:
Loosen screw.
Remove cutting blade.
Place a round tube over the blade hole to check
whether the blade is balanced (as in the picture
beside). If it is not, balance it by sharpening
the cutting area until the removal of material
reestablishes the balance of the blade.
44
Cutting Blade - Blade Balancing
gloves
to
assemble
If your lawn is very high, avoid overloading the
engine by using only half of cutter cutting range, as
shown below.
If vibration persist (blade is too worn), consult
TRAPP service dealer to replace blade.
and
Re-install blade onto support disc, respecting
cutting direction with motor direction. Also
inspect support disc, replace if damaged.
Only use original TRAPP blades.
www.trapp.com.br
Tabla de contenido
