Mitsubishi Electric MSZ-GL06NA Manual De Instrucciones página 11

Ocultar thumbs Ver también para MSZ-GL06NA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• When dirt stands out, wash it with kitchen neutral detergent diluted with lukewarm
water to the specifi ed concentration, then wipe off the detergent with a damp towel.
Air fi lter (Nano platinum fi lter)
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is "Nano platinum fi lter"?
Nano platinum is a ceramic particle that includes a platinum nanoparticle. The
particles are incorporated into the fi lter material, which results in providing semi-
permanent antibacterial and deodorizing characteristics for the fi lter. Nano plati-
num surpasses the catechin (a biofl avonoid that is found in green tea) in perfor-
mance. Nano platinum fi lter uses this compound not only to improve air quality
but also to eliminate bacteria and viruses. This air fi lter has a semi-permanent
lasting effect even after washing it with water.
Front panel
Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the front panel by following the removal proce-
dure in reverse. Close the front panel securely and
press the positions indicated by the arrows.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not use water hotter than 50°C.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
Air cleaning fi lter
(Anti-Allergy Enzyme Filter)
Back side of air fi lter
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number
MAC-408FT-E
Pull to remove from the air fi lter
• Clean the fi lters regularly for best performance and to re-
duce power consumption.
• Dirty fi lters cause condensation in the air conditioner which
will contribute to the growth of fungi such as mold. It is
therefore recommended to clean air fi lters every 2 weeks.
Important
En-10
Tabla de contenido
loading

Este manual también es adecuado para:

Msz-gl09naMsz-gl12naMsz-gl15naMsy-gl09naMsy-gl12naMsy-gl15na

Tabla de contenido