Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
When power off, the unit or it is in a standby mode, the back-light of display screen will be illuminated.
The control panel functions are activated by touching the individual icons on the display screen.
There are six feather touch control buttons, it will be illuminated on the display screen by pressing
the relevant button.
POWER
Press the POWER icon to turn the unit on. The cooler will start automatically at medium speed.
After a few seconds the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between H - M - L.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5
hours of use.
SWING
Press the SWING button until
The louvers will begin to move left to right automatically.
You can manually adjust the louvers to change vertical air flow.
WIND TYPE
Press the Wind type button to select your desired wind type: Random or Sleep
Natural: This mode changes wind speed randomly to mimic a natural breeze.
Sleep: This mode reduces wind speed in half-hour intervals and then stays at Low speed for quiet
comfort at night. Control panel lights will also turn off until it is touched again.
/
MODE
COOL
/
Press the
button until
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling
Media is completely wet.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water
Alarm and
(the low water alarm icon) will be illuminated on the display screen, then the cooler will
start in a Fan only mode without evaporative cooling.
An Ionizer*^ helps to reduce particles in the air, thus promoting cleaner air quality. For models with
the Ionizer*^ feature, pressing the
is illuminated on the display screen. When it is not illuminated, the unit will function in a Fan only
mode without evaporative cooling.
is illuminated on the display.
icon is illuminated on the display screen. This activates evaporative
button again will activate the Ionizer*^ and you will see
EN
3
Louver
Movement
*Applicable for models with this feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
icon
Tabla de contenido
