Denon AVC-A1SR Instrucciones De Operación página 40

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 163
ENGLISH
Digital to provide a wide stable rear soundstage.
Advanced Speaker Array
ASA processing offers maximum effect when two surround back speakers are used and the speakers are
placed near each other. This technology is used for Ultra2 Cinema, THX Music MODE and THX Surround EX.
Boundary Gain Compensation
When using a THX Ultra2 compatible subwoofer or a subwoofer with ultra-low frequency playback
capabilities (with a frequency response extending to approximately 20 Hz), the low frequency band may rise
and the sound may seem booming. This technology compensates the gain and makes the audible level flat.
Lucasfilm, THX, Home THX, Re-Equalization, Timbre Matching, Adaptive Decorrelation and THX Ultra are
trademarks of Lucasfilm Ltd.
(6) THX Surround EX
In 1999, a new surround system was launched simultaneously with the release of the movie "Star Wars
Episode I". "Dolby Digital Surround EX" is a new movie sound track that greatly enhances the sense of
spatial expression and the positioning of the surround channel sound.
movement and moving sound effects that seem to pass right over the listener's head.
This system was developed jointly by Lucasfilm THX and Dolby Laboratories, fusing Lucasfilm's idea of
improving spatial expression and achieving a uniform 360 degree sound positioning with Dolby Laboratories'
matrix encoding technology. Emphasis was placed on compatibility with the existing system Dolby Digital
5.1-channel, and the new "surround back (SB) channel" was added to achieve improvements over the
conventional 5.1-channel system in terms of the positioning of the sound at the rear, the acoustic image of
sound moving from the two sides to the back as well as sound moving from the front to the center rear with
the multi surround speaker systems used in movie theaters, thereby enabling various types of surround
sound.
The surround back channel signal is a matrix-encoded signal inserted into both the Dolby Digital SL (surround
left) and SR (surround right) channels. Upon playback, the signals are decoded by a high precision digital
matrix decoder within the Dolby Digital decoder into the SL, SR and SB channels and output as 6.1 channels
of signals. With the AVC-A1SR, the signals further undergo Home THX Cinema processing to achieve a THX
Surround EX system.
Even without the proper environment for playing the SB channel, Dolby Digital Surround EX signals are 100%
compatible with existing 5.1-channel playback systems, so they can be played as such. In this case, the SB
channel signal is produced as a monaural signal from both the SL and SR channels, so none of the signal
components are missing. The effects specific to THX Surround EX (the sense of spatial expression and the
positioning of the sound), however, are the same as with conventional 5.1-channel surround systems.
©Lucasfilm Ltd. & TM. All Rights Reserved. Surround EX is a jointly developed technology of THX and
Dolby Laboratories, and is a trademark of Dolby Laboratories. Used under authorization.
40
System setup items and default values (set upon shipment from the factory)
• System setup items and default values (set upon shipment from the factory)
Speaker
Configuration
(Surround
q
Speaker
Setting)
Crossover
Frequency
Subwoofer
The result is 360 degrees of
mode
w
Delay Time
Channel
e
Level
THX Audio
r
Setup
Subwoofer
t
Peak Limit
Lev
Digital In
y
Assignment
Video Input
u
Mode
i
Audio Delay
Multi Zone
o
Control
Auto
!0
Surround
Mode
Ext. In
!1
Setup
Digital Multi
!2
Ch In
On Screen
!3
Display
!4
Setup Lock
System setup
Input the combination of speakers in your
Front Sp.
system and their corresponding sizes (Small for
regular speakers, Large for full-size, full-range) to
automatically set the composition of the signals
output from the speakers and the frequency
Small
response.
Use this function when using multiple
DOLBY/
Surround
surround speaker combinations for more
DTS
mode
THX 5.1
ideal
surround
sound.
Once
the
SURROUND
combinations of surround speakers to
be used for the different surround
modes
are
preset,
the
surround
Surround
speakers are selected automatically
A
speaker
according to the surround mode.
Set the frequency (Hz) below which the bass sound
of the various speakers is to be output from the
subwoofer.
This selects the subwoofer speaker for playing
deep bass signals.
This parameter is for optimizing the timing with
Front L & R
which the audio signals are produced from the
speakers and subwoofer according to the listening
3.60 m (12.0 ft)
position.
This adjusts the volume of the signals output from
Front L
Front R
the speakers and subwoofer for the different
channels in order to obtain optimum effects.
0.0 dB
0.0 dB
When
using
a
THX
Ultra2
Boundary
Gain
compatible subwoofer, set the
compensation
subwoofer's frequency response.
Surround
When using two surround back
Back
speakers, set the distance of the
The Distance Between SBL/SBR = 0 m to 0.3 m (0 ft to 1 ft)
Speaker
two speakers.
Position
This parameter is for detecting the maximum level
of the low bass signals output from the subwoofer
channel in order to protect the subwoofer from
damage and prevent unpleasant distorted sounds
from being produced.
Input
CD
DVD
source
This assigns the digital input jacks for the
different input sources.
Digital
COAXIAL
COAXIAL
COAXIAL
Inputs
1
2
Set the input signal to be output from the monitor
output terminal.
Adjust the time delay of the video and audio
signals.
Multi Zone1
This sets the output level for the
vol. Level
multi-zone1 output jacks.
Set this to switch the surround
Power AMP
back channel's power amplifier for
Assignment
use for multi-zone2.
Auto surround mode function setting.
Set the Ext.In terminal playback method.
MODE = DSP, S.Back = NOT USED, SW Level = 15 dB, INPUT Vol. = 0 dB
Digital multichannel input setting.
This sets whether or not to display the on-screen
display that appears on the monitor screen when
the controls on the remote control unit or main unit
are operated (from MONITOR 1 outputs only).
Set whether or not to lock the system setup
settings so that they cannot be changed.
Default settings
Surround
Center Sp.
Sub Woofer
Surround Sp.
Back Sp.
Small
Yes
Small
Small / 2spkrs
MULTI
THX
WIDE
5CH/7CH
DSP
CH
SCREEN
STEREO
SIMULATION
DIRECT
A
A
A
A
A
FIXED —THX—
LFE —THX—
Center
Sub Woofer
Surround L & R
SBL & SBR
3.60 m (12.0 ft)
3.60 m (12.0 ft)
3.00 m (10.0 ft)
3.00 m (10.0 ft)
Surround
Surround
Surround
Surround
Center
Subwoofer
L
R
Back L
Back R
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
THX Ultra2 Subwoofer = NO
Peak Limiter = OFF
DBS/
VDP
TV
VCR-1
VCR-2
VCR-3
V. AUX
TAPE-1
TAPE-2
TUNER
SAT
OPTICAL
OPTICAL
OPTICAL
OPTICAL
COAXIAL
COAXIAL
OPTICAL
OPTICAL
OFF
3
1
2
3
4
4
5
5
6
AUTO
Audio Delay = 0 ms
Variable
Surround Back
Auto Surround Mode = ON
DENON Link = OFF, Digital Ext. In = OFF
On Screen Display = ON
Setup Lock = OFF
Tabla de contenido

Solución de problemas

loading

Tabla de contenido