Tabla De Contenido - ABAC A29B/50 CM3 Guía De Referencia Rápida

G
fig. 8
B
fig. 9
Please check that the air consumption and the maximum working
pressure of the pneumatic tool to be used are compatible with the
pressure set on the pressure regulator and with the amount of air
supplied by the compressor.
3 AIR RECEIVER (ON TANK-MOUNTED UNITS)
4 MAINTENANCE
PRIOR TO ANY OPERATION SET THE PRESSURE SWITCH TO THE
OFF POSITION, PULL OUT THE PLUG AND COMPLETELY DRAIN THE
RESERVOIR.
fig. 10
5 POSSIBLE FAULTS AND RELATED PERMITTED REMEDIES
FAULT
TABLE 1 - TIGHTENING OF HEAD TENSION RODS
Screw M6
Screw M8
Screw M10
Screw M12
Screw M14
(figures 11a - 11b).
API CC/SC SAE 40
fig. 13
fig. 7a
fig. 14
FUNCTION
Cleaning of intake filter and/
or substitution of filtering
element
Change of oil*
Tightening of head tension
rods
Draining tank condensate
Checking the tension of
the belts
*
The compressor must be disposed in conformity with the methods
provided for by local regulations
CAUSE
18
Nm
Min. torque
9
76
API CC/SC SAE 20
fig. 12
TABLE 2 - MAINTENANCE
AFTER THE
EVERY 100
FIRST 100
HOURS
HOURS
MUST BE DISPOSED OF
REMEDY
.
Nm
Max. torque
11
EVERY 300
HOURS