Black and Decker TR116 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
ASSEMBLY TOOLS REQUIRED (NOT SUPPLIED):
- Phillips Screwdriver
ATTACHING GUARD TO TRIMMER
WARNING:
Only use with handle and guard properly
assembled to hedge trimmer. The use of the hedge trimmer
without the proper guard or handle provided may result in
serious personal injury.
The trimmer is shipped with
the guard unattached to
the trimmer. To attach the
guard:
• Position the guard in place
as shown in figure A.
• Insert the phillips head
screws into the openings
on the side of the guard
and tighten securely as
shown in figure B.
All manuals and user guides at all-guides.com
A
B
ATTACHING EXTENSION CORD TO TRIMMER
WARNING:
Ensure the trigger switch is not engaged to reduce
the risk of starting the
appliance accidentally.
A cord retainer is incorporated
into the rear of the handle on
the power head.
• Near the end of the extension
cord, fold the extension cord
to create a loop.
• Feed the loop into the cord
retainer housing (8) as
shown in Figure C.
• Hook the loop onto the cord retainer (9) so it rests in the cord
retainer.
• Plug the extension cord into the power head.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
OPERATING INSTRUCTIONS
TO TURN THE TOOL ON
To turn the tool "ON", slide the lock off
button, shown in figure D, backward
and squeeze the trigger switch. Once
the unit is running, you may release
the lock off button.
In order to keep the unit running you
must continue to squeeze the trigger.
To turn the tool "OFF", release the
trigger.
5
C
9 8
D
4
5