Idiomas disponibles
Idiomas disponibles
109. If equipped, install the link rod (1) end to the liftgate
by pushing the link rod (1) onto the liftgate (3).
110. Install the plastic retainer (2) to the locking mecha
nism for the head of the power liftgate link rod (1).
111. Position the left quarter trim panel (5) into the vehicle.
112. Connect the auxiliary power outlet and power inverter
(2) wire harness connectors (3) (if equipped).
113. Align the trim panel over the retaining slots on the in
ner quarter panel (1) and firmly snap into place.
114. Install the six quarter trim retaining screws.
115. Install the third row upper turning loop anchor bolt.
116. Install the third row lower seat belt webbing anchor
(4).
117. Position the quarter trim bolster (5) into the vehicle
and slide the rear seat belt (3) into the slot.
118. Align the locating tabs (4) with the holes in the left
quarter trim panel.
119. Carefully engage the quarter trim bolster upper re
taining tabs (2) by inserting them into the left quarter
trim panel and swinging the bottom edge of the bolster
towards the left quarter trim.
120. Push the quarter trim bolster into the left quarter trim
panel until the retaining clips (1) are fully seated.
Jun 30, 2011
All manuals and user guides at all-guides.com
23
K6861197
