Idiomas disponibles
Idiomas disponibles
48. Disconnect the power locking latch cable (2) from the
exterior liftgate handle and remove the cable from the
handle.
49. Disconnect the wire harness connector (3) from the
exterior liftgate handle.
50. Remove the two bolts (4) that secure the exterior lift
gate handle to the liftgate.
51. Remove the two bolts (1) that secure the bezel to the
liftgate.
52. Remove the pinch sensor retaining screw (4) near the
cover (3) on both sides of the liftgate (2).
53. Remove the pinch sensor cover push in retainer (1)
on both sides of the liftgate (2).
54. Open the pinch sensor cover (2) on both sides of the
liftgate.
55. Pull the end of the pinch sensor (3) down enough to
access the exterior body panel nut (1) under the sen
sor on both sides of the liftgate.
56. Remove the exterior body panel nuts (1) on both sides
of the liftgate.
Jun 30, 2011
All manuals and user guides at all-guides.com
11
K6861197
