General operating instructions
1. Both the explosion-proof ExResistTel telephone and the ZB version
are designed for connection to dial ports with analogue connection
points.
2. The handset is fitted with a stray-field coil for connecting hearing-
aids. People who use hearing-aids which have an inductive receiver
can receive the earphone signal directly.
3. The ZB version is not equipped with keypad and display, therefore
not all the features are available with this version.
4. The ExResistTel has a handset module with a dry reed contact as a
hook switch. In order to terminate an existing call connection, the
handset must be hung up. In order to interrupt an existing call
connection, it is sufficient to press the clearing key on the
keypad.(see page 8)
5. Use the menu to program the appropriate settings. To access the
menu, pick up the handset and press the "YES" key.
6. If you take longer than 2 minutes before you begin making a choice,
the power supply of the exchange may be switched off. If that
occurs, you will no longer hear a dialling tone. In that case, please
replace the handset and wait 2 seconds before picking it up again.
7. When a setting is stored successfully, this is confirmed by an
acknowledgement tone.
8. When you receive a call, the ExResistTel rings at the ringer-volume
level selected by you and, for the duration of the calling sound, the
symbols ( ( (
9. If you enter a PIN with the menu you can restrict or block dial
functions. Forgetting the PIN is the equivalent of losing a key. If you
forget the PIN, please contact our technical support.
10. You have a guarantee period of 24 months commencing from the
date of purchase. If you have a problem, please contact our
technical support in Germany, located in Mülheim an der Ruhr:
Phone: +49 208 82 68 256
Fax:
+49 208 82 68 377
If a fault occurs which cannot be rectified by telephone, please send
the whole telephone along with a copy of the sales receipt to the
following address:
4
) ) ) appears on the display.