General Operating Conditions - Eaton ResistTel MB Instrucciones De Servicio

General operating conditions

1. The ResistTel MB weatherproof phone can be connected to the
telephone lines of analogue exchanges.
2. The handset is fitted with a stray field coil for connecting hearing aid
devices. Persons wearing a hearing aid device with an inductive
receiver can directly receive the signal of the earphone.
3. The optional external speaker can be used in ringer, open listening
and hands-free modes. The volume of the internal speaker is
reduced when the external speaker is turned on.
4. The phone has a receiver mount with a reed contact hook switch.
The handset must be placed back on the mount to end the call. A
conversation is ended and a new call is started by pressing the
disconnect button on the keypad (see page 8).
5. If the you do not make a selection within 2 minutes, the exchange
can cut off the power supply. Then you will stop hearing the dial
tone. In this case, please place back the handset, wait for 2 seconds
and lift the handset again.
6. An acknowledgement tone confirms that the settings have been
stored.
7. When you receive a call, the ResistTel MB phone rings with the
selected volume.
8. Changing the settings can be prevented by setting a PIN number.
Forgetting the PIN number is similar to losing a key. If you forgot the
PIN number, please contact our technical support service.
9. There is a warranty period of 36 months from the date of purchase.
In case of any problems please contact our technical support
service in Germany, Mülheim an der Ruhr
Phone: 0208 82 68 256 · Fax: 0208 82 68 286
E-mail: [email protected]
Please use the country code if calling from outside Germany:
Phone: +49 208 82 68 256 · Fax: +49 208 82 68 286
4