Terminal Board Description; Outdoor Camera/Relay 2 (Op20) Connector Description; Configuring The Video Door Phone; Relay Functions And Configurations - Urmet vmodo 1723 Manual Del Usuario

3.4 TERMINAL BOARD DESCRIPTION

Terminal board
1
2
3.5 OUTDOOR CAMERA/RELAY 2 (OP20) CONNECTOR
DESCRIPTION
The outdoor camera ref. 1092/250A can be connected to the Master video door phone using the wire (B7)
provided.
Wire n. Wire colour
1 Blue
2 Blue
3 Red
4 Brown
5 Yellow
6 Black
4

CONFIGURING THE VIDEO DOOR PHONE

4.1 RELAY FUNCTIONS AND CONFIGURATIONS

The video door phone is provided with two programmable relays, as shown in the following table:
Relays
Supplementary ringer
1 Home Automation button 1
Siren alarm
Home Automation button 2
2 Siren alarm
Thermostat output
DS1723-049B
Terminal name
Staircase lights (relay output 2 – OP20)
Staircase lights (relay output 2 – OP20)
Camera power positive
Video balun negative output signal
Video balun positive output signal
Camera power negative
Possible function
LI
Bus input (LINE IN)
LI
LO
Bus output (LINE OUT)
LO
LP
24Vac local power
LP
FC
Floor call
FC
0
Supplementary ringer (output relay 1 – OP5)
C
AL
Alarm sensor input
AL
6 5 4 3 2
Description
Default
Description
1
Pin name on connector
RELAY SPARE
RELAY SPARE
CCTV POWER+
CCTV VIDEO-
CCTV VIDEO+
CCTV POWER-
✔
✔
Riference
OP5
OP20
19