Braun No touch + touch BNT300 Manual De Instrucciones página 4

Fever guidance feature
Fever guidance helps you to better understand the meaning of your child's temperature with the
color indicated on the display. The screen displays green if no fever, yellow for fever and a red alert
for a possibly high fever. 10 audible beeps indicate temperatures above 37.4 °C (99.4 °F) to alert the
user that the patient may have a fever.
Color range Reading
Green ≥ 35.8 – ≤ 37.4 °C
(≥ 96.4 – ≤ 99.4 °F)
Yellow > 37.4 – ≤ 38.5 °C
(> 99.4 – ≤ 101.3 °F)
Red > 38.5 °C
(> 101.3 °F)
NOTE: Backlight remains OFF when below temperature readings are registered:
34.0 ≤ T < 35.8 °C (93.2 ≤ T < 96.4 °F)
How to use your Braun No touch + touch
1. Remove cap
2 Power on
Press and release the power
button once. Backlight will come
on and the start-up sequence
begins.
NOTE: Make sure to remove the
protective scanner cap before
taking a measurement.
When the thermometer is ready and correctly positioned, a horizontal line of dashes ("---") will
appear on the screen.
4
Meaning
Normal
Fever
High fever
3. Position
Position thermometer on or up to 2.5 cm away from
the center of the forehead, just between the eyebrows.
For No touch readings, the yellow guidance light will
show you where you are aiming. If the eyebrow area is
covered with hair, sweat or dirt, please clean the area
beforehand to improve the reading accuracy. It is
important to hold the thermometer and the forehead
steady during measurement. Movement will impact
the temperature reading.
Temperature results may vary if positioned in the
wrong location
4. Take temperature
Press the temperature button (you can press and hold the button or press
and release it). When the thermometer is placed correctly, the screen
displays a dashed line animation while it takes a reading. After the
animation sequence (under 2 seconds), the display shows the temperature
reading. The appropriate fever light color is displayed on screen and the
confirmation beep is heard.
If the thermometer is positioned
too far away from the forehead, it
will prompt you to move the
thermometer closer by displaying
diagram and "0-2 cm". Slowly
move the thermometer toward
the forehead until the horizontal
line animation starts and the temperature reading is displayed.
5. Read temperature
Remove the thermometer and read the temperature. For low
(no backlight) and normal (green backlight) temperature
range, you will hear a single long beep for 2 seconds. For
fever (yellow backlight) and possible high fever (red
backlight) temperature range, you will hear 10 short beeps.
To repeat
Go to step 3.
6. To turn off
Press the power button to turn off. Device will also shut off automatically after 60 seconds of no use.
English
0 - 2.5 cm
0-5 cm
( )
0 - 3"
0-5 cm
Red
( )
High fever
0 - 3"
Yellow
Fever
Green
Normal
5