HTW CAL2000BLACK Manual De Usuario página 15

SAFETY CONTROL
Your heater is fitted with a safety device "Double Protector" that (1) switches off
the heater by thermal cut-off in the event of overheating or malfunction, It will
reset while the temperature reduce to a normal level. (2) Shuts off the heater by
thermal fuse in the event of overheating or malfunction and not operates by some
other accidental reason.
If overheating or malfunctions continue, return the heater to an Approved Service
Agent for examination.
The most common cause of overheating is deposits of dust or fluff entering the
heater, Ensure these deposits are removed regularly by unplugging the unit and
vacuum cleaning air vents and front grille.
PILOT LIGHT
This fan heater is equipped with a pilot light that glows whenever the heater is
plugged in and turned on. It will continue to glow even if the thermostat has cycled
the heating elements off. This feature is to prevent you from being unaware that
the heater is operating and maintaining the temperature of the room.
When you do not wish the heater to control the room temperature, turn the control
switch to O (off) and remove the plug from the electrical outlet.
Troubleshooting
If the product does not operate or does not operate properly, first check according to the
following list. If the reason the product does not operate or does not operate properly is
not included in the following list, the product mayhave failed. At this time, it is
recommended to send the product to
the dealer or the Media Service Center for treatment .
Problem
A�er the power is
engaged, the power
indicator light does not
illuminate and the
machine does not work.
The machine suddenly
stops during hea�ng.
Possible Cause
The plug may not be
plugged well.
The temperature control
knob is not turned in
place.
The temperature exceeds
the threshold of the
thermal cut-off.
4
Solu�on
Check whether the plug is
properly inserted into the
receptacle.
Check whether the
temperature control knob
is turned to the ON
posi�on.
Cool the machine before
use.