DHC BT2400 Manual Del Propietário página 7

Replace / Install the AA alkaline batteries.
1. Unscrew the battery cover to
access the battery tank.
2. Pull the strap up to remove the AA
batteries and install new ones
(Always keep the strap under the
batteries.)
3. Close the battery cover and tighten the screw.
Replace / Install the rechargable 18650 lithium batteries.
1. Unscrew the battery cover to access the battery tank.
2. Install / Replace the 18650 lithium
batteries from the battery holder.
3. Plug in the connector of the 18650
lithium battery holder.
4. Place the 18650 lithium battery
holder in position. (Always keep the
strap under the battery holder.)
5. Close the battery cover and tighten
the screw. (Make sure the battery
cover doesn't clip on the cables of
the battery holder when closing.)
6. Tighten the srew of the battery
cover.
*18650 lithium batteries are not
included in the package.
7